Gary Ayton's camping and photography wiki

User Tools

Site Tools

Trace: • tarp shelter set ups for camping and hiking • solar power for camping
australia:camping_solar

Table of Contents

solar power for camping

see also:

  • I don't sell any of these nor do I receive any remuneration if you buy them, and I have not personally reviewed all of them, they are listed here to give you perspective

Introduction

  • current solar panels are based upon silicon cell technologies which combine the output of a number of cells
  • these are usually rated at around 80-350W when tested at Standard Test Conditions of 1000W/sqm incident sun, 25degC and AM1.5 air mass spectral conditions.
    • in real usage, incident light is likely to be 800W/sq.m or less and thus one often uses nominal operating testing conditions of 800W/sq.m, 20degC with a 3.5kph breeze to keep it cool
  • the larger the power rating, the larger the surface area needs to be to create that power output for a given panel efficiency
  • sellers (especially those online) may grossly over-estimate the output of panels, test actual outputs or do the maths:
    • The standard test of efficiency and output is done with sunlight falling on the panel with an intensity of 1000 watts per square metre and 25degC. The efficiency of the panel will be in the specs, and should be around 17%. So the panel should be producing 1000 x 17 / 100 = 170 watts per square metre of its area. So to get the actual output of the panel just use the dimensions of the panel, calculate its area in square metres, and multiply that by 170.
  • traditional panels have glass fronted panels mounted in an aluminium frame making them bulky and heavy
  • more modern “soft fold” panels are much lighter, more compact and more convenient but considerably more expensive than the older aluminium framed ones
  • for max. efficiency place at correct angle to the sun (at midday, this angle should be your latitude, whereas in the morning or afternoon, the angle will need to be more than this), this may increase output of a 200W panel from 7A laying flat to 9A placed at a more optimum angle (11A/18V in perfect conditions), plus this allows better ventilation to keep them cooler and they wont kill the lawn as may occur if you lay them flat
  • older or cheaper panels may not have blocking diodes in each section and the output may become zero if even one section falls under shade of a tree
  • a portable panel is generally more useful when camping instead of a fixed roof panel
    • it allows you to park your vehicle in the shade and place your panels in the sun (you may need an Anderson plug extension cord for this)
    • it allows you to optimise the angle of the panel to the sun throughout the day
    • you can combine the output with a fixed roof panel output for added versatility
    • however, they are at higher risk of theft and damage and obviously you do need to set them up
  • you can combine two panels into one controller which should give the combined current
    • just use an Anderson plug splitter (2 plugs going into one plug)
  • you also need a solar regulator to charge a battery and ability to choose the correct charge mode for certain batteries such as LiFePO4
  • there are many solar panels and blankets marketed with falsely high power output ratings
    • most solar panels have similar cell efficiencies of around 23%, and thus, you could generally determine the likely maximum power you will get by comparing the surface area of solar cells with a trusted brand - if a trusted brand has one at 200W and an online brand has a similar sized one, it is not going to deliver 300-1600W of whatever they claim, and you would probably be lucky to get to 160W

Troubleshooting solar panels

  • see also https://www.redarcelectronics.com/au/resources/solar-faqs/testing-solar-panels-and-blankets/
  • testing the solar panels in full sun with no shadows on the panel and disconnected from any controller or battery
    • solar panels are primarily current generators not voltage generators and as such they are not damaged by short circuiting as are batteries but they may fail due to damage to the solar cells or the wires
    • ONLY test ONE panel at a time
    • DO NOT TEST panels with ratings more than 10A ISC or more than 90V VOC without expert help
    • check the open circuit voltage (VOC)
      • set multimeter to DC voltage setting up to 100V and connect its red wires with the panels +ve output and the black wire with the panel's -ve output
      • most panels for 12V systems should have a reading of 20-22V (check the specs for your panel)
      • if the voltage is much lower than this despite being in full sun, then there is something wrong with the panel - if it is 0V then it may be a wire fault
    • check the short circuit current (ISC)
      • as short circuit current is often > 10A DC which is higher than most multimeters are rated for you should use a clamp meter (don't forget to zero it)
      • remove any load from the solar panel then BRIEFLY for max of a few seconds, short circuit the output wires while the clamp meter is around one of the output wires and read the current. - see https://www.youtube.com/watch?v=8LRTwiXZDWM
      • if the VOC was correct but the current is under 1A despite being in full sun, this would suggest a faulty solar cell which is now acting as a resistor in series
      • current = voltage/resistance
        • a 100ohm resistor in series would result in a VOC reading of 22V but an ISC of only 0.2A current
      • a blown bypass diode inside the junction box may be the cause (eg. from connecting a battery with reverse polarity)
      • lower than rated ISC in full sun may be due to faulty panel section which could be checked by:
        • have panels in full sun and cover each section one at a time to see if it impacts the ISC current (if the ISC current drops that is normal, if it doesn't then that section is not working)
  • if the VOC and ISC are as per specs, then load testing may reveal hidden faults
    • a simple visual test can be done using 2 x 12V 21W globes in series or 1 x 24V 55W incandescent globe which should shine brightly when the panels are in full sun
    • if this fails (and the globes are not faulty), then the panel may be faulty or the wire connections may be faulty

types of panels

  • you should purchase Class A (or perhaps class B) rated solar cells, lower classes have too many defects and much less efficiency
  • main types:
    • polycrystalline - cheapest, individual cells have maximum efficiency of around 22%
    • monocrystalline - most efficient, individual cells have maximum efficiency of around 26.5% but most panels are rated around 20-23%
    • Passivated Emitter and Rear Cell (PERC) - usually monocrystalline, usually 21-23% efficient
    • N-type - usually monocrystalline, boost cell efficiency by 25% and generate 3–7% more energy than PERC giving up to 25% efficiency and less drop in efficiency at higher temperatures than PERC
    • amorphous - expensive, thinner, more flexible and durable, slightly better in cloudy conditions but only 10% efficiency so need more area
  • new shingle cell design allows for better efficiency as1):
    • there are no busbars (ribbons) required
    • can be joined together in overlapping shingle manner resulting in no gaps between the solar cells
    • they can be combined in parallel rather than series which allows partial shading to be not as problematic EXCEPT when shade is in vertical axis and this may actually result in less power output than conventional panels
    • produce more power per sq. metre as less inactive area
    • improved reliability as lower busbar failures and more resistant to external forces
    • more aesthetically pleasing as no visible circuitry
  • future panels
    • 2025 graphene perovskite can improve efficiency to 30% and 80% cheaper 2)

solar panel specifications explained

  • the maximum wattage in ideal conditions = voltage at max. power x current at max. power
  • the open-circuit voltage, VOC, is the maximum voltage available from a solar cell, and this occurs at zero current and for most commercial silicon cells at 300degK is around 0.6V.3) Most 12V solar panels have a total open circuit voltage of around 21-23V and generally is highest mid-morning when the panel has not become too hot. This can be measured with a multimeter across the open ends of the wires attached to the panel. The solar controller specifications for input voltage must be greater than this otherwise the controller will shut off.
  • the short-circuit current ISC is the largest current which may be drawn from the solar cell (this can be measured by passing the current through a multimeter configured to measure amps but care must be taken to avoid arcing) and this depends upon:
    • area of the solar cell
    • light intensity hitting the cell
    • wavelength spectrum of incident light (most silicon cells have sensitivity 0.4 to 1.1 micron wavelengths, glass removes most of the wavelengths shorter than 0.4microns)
    • optical properties of the cell - absorption, reflection (surface should be matte with minimal reflection)
    • collection probability of the cell (depends chiefly on the surface passivation and the minority carrier lifetime in the base)
  • over-heating of panel reduces efficiency so keep them well ventilated
    • open-circuit voltage for a silicon solar cell (which is usually around 600mV) falls by about 2.2mV (or around 0.4%) for each 1degC rise in temperature (there is minimal change in short-circuit current though) 4)
    • the panel's Normal Operating Cell Temperature (NOCT) is an indicator of how well it dissipitates heat - the lower the better as it heats the panel up less during operation.

things to consider when buying

  • you will generally only get about 35-85% of the rated power in full sun, and much less if cloudy or dirty
  • what style best suits your needs - fixed to a vehicle roof, portable folding panels, or smaller blanket style which could be placed over windscreen
    • NB. blankets don't have kick legs to prop them up so lying them flat on the ground loses efficiency but will also kill the grass due to heat generated and the lack of ventilation will cause them to overheat and further reduce efficiency
  • bifacial panels work also from the rear so they can add a little more power (perhaps up to 30% more) from reflected light hitting the rear
  • your budget
    • but beware, a cheap panel may break very easily (most are quite fragile) or under-perform and may represent false economy
  • what power output you need - aim to get more than you need - most campers will want 150-300W
  • does it have blocking diodes so that shade on, or damage to, one section doesn't stop the whole output?
  • size and weight
    • power output to weight ratio can be important - the ZOUPW 480W has probably the best on the market 9.6W/kg
  • durability
    • need to ensure surface is not subject to damage such as during transport or storage
    • panels are more likely to last longer than blankets which tend to be more flexible and have more folds, and those with aluminium frames should be even longer lasting
    • coating makes a big difference to durability look for EFTE or raptor/croc skin (these are embossed textured EFTE for reduced reflections and improved water beading but can trap dust which limits any potential performance gains if not washed and can be harder to clean)
    • more busbars (eg. 16BB instead of 3-5BB) may give more graceful deterioration as there are more options for currents to bypass wiring fractures
      • they also can boost conversion efficiency to 19-25%, cut resistive losses, reduce hotspots and microcracks, and improve performance in shade or heat.
    • more rigid frames (eg. aluminium or “suitcase style”) are likely to last longer as there is less stress on wires
    • keep panels flat and supported during use, avoid twisting or bending each leaf, and don’t leave blankets permanently cable‑tied to moving or flexing parts of a vehicle
    • water ingress to output connectors can cause failures
    • don’t disconnect under full load, avoid mismatched connectors, and prevent cable abrasion/pinching to reduce arcing, hot plugs, and shorts
    • avoid walking on them or putting gear on top, that directly drives cell microcracks and interconnect damage
    • store panels out of full sun and weather when not in use and avoid prolonged rain exposure even if “waterproof”
  • manufacturer reputation and warranty
  • beware of scammers online who falsify output etc - do your research on them!
  • how easy is it to set up on an angle to optimise efficiency
    • blankets need to be rested up against an object
    • folding panels have kickstands but many are flimsy and lack eyelets for pegging or secondary support straps to prevent them from collapsing
  • how will you keep it well ventilated to keep it cool
    • this is an issue for blankets or panels lying on a ground or fixed panels on a roof
  • how will you prevent it from being stolen
    • perhaps don't buy a portable one that looks expensive
  • weather-resistance including hail damage but also resistance to being blown over in the wind - ability to peg down is useful
  • how will you angle it to optimise the sun's direction - some have built in legs to assist with this
  • what connector would you prefer
    • MC4 allows parallel and serial combinations of panels but you may then also need a MC4 to Anderson plug cable
      • NB. serial connections are less shade tolerant and result in adding voltages of each panel which may exceed the max input voltage of your solar regulator causing damage! (in contrast, parallel connections have same voltage of individual panels but add the current)
    • Anderson plug cable - simplest option
  • what solar regulator to use
    • many come with solar regulators but these may be older PWM styles instead of more efficient MPPT, and many will not be compatible with lithium batteries
    • you may need to buy a separate solar regulator

effect of angle of sun to panels

  • panels are designed to work optimally when the sun is perpendicular to the surface
  • in the middle of the day at the Summer solstice, the sun will be angled away from the perpendicular by the same angle as the location's latitude less 23deg and by the Spring and Autumn equinox's at midday the angle is just the latitude
    • thus for Victoria at around 38degS latitude, the panels need to be angled 15deg at midday in summer and more at other times of the day or in other seasons (38deg in Sept and March at midday)
    • ie. elevation angle of the sun = 90 - latitude + declination of sun
    • ie. angle of sun from zenith = latitude - declination of sun
  • this has 2 main effects of solar panel efficiency:
    • reduction of intensity due to increasing Air Mass when sun is lower in the sky
      • Intensity perpendicularly direct onto panels = 1.353 x 0.7 (AM^0.678)
      • Air Mass = 1/cos(elevation angle of sun in degrees)
      • Air mass at zenith (0deg) = 1; Air Mass at Summer Solstice midday at 38deg latitude = 1.09;
      • at latitude 38degS the intensity on a panel tilted perpendicular to direct sunlight at midday is:
        • Jan 1.03kW/sq.m
        • April/Sept 0.98kW/sq.m (by 7am it has already reached 0.55kW/sqm and by 9.30am 0.9kW/sq.m)
        • June 0.8 kW/sq.m
      • this can be substantially offset by the cooler temperatures in winter significantly reducing resistance and improving efficiency of the panel
    • reduction of intensity due to incident angle on panels
      • intensity of sun onto a horizontal surface = intensity when perpendicular to sun x sin(elevation of sun in degrees from horizon)
        • thus at 38degS at midday in Apr/Sept elevation = 90-38 = 62deg thus 88% of perpendicular intensity
      • intensity of sun onto a tilted surface = intensity when perpendicular to sun x sin(elevation of sun + angle of tilted surface to horizontal)

examples of commercially available 12V panels in Australia

aluminium frame panels

lighter folding large panels 600-900mm

lighter blanket style folding to 600mm or less

  • Atem 200W blanket
    • $AU239 incl. MPPT Controller compatible with lithium; 7.4kg folds down to 475 x 420 x 60mm; All cables are terminated with Anderson plugs;
  • Kickass 160W
    • 7.2kg; Anderson plug; folded 400x380x70mm; unfolded 1620x755mm; $AU339
  • Kings 240W blanket
    • 460x440x60mm folded; 6.6kg; 2 rows = 1650x940x7.5mm unfolded; $178 on special RRP $299 poor quality surface does not last well
  • Kings 360W blanket
    • 460x440x90mm folded; 9.6kg; 3 rows = 1650x1420x7.5mm unfolded; $279 on special poor quality surface does not last well
  • San Hima 160W, 260W and 360W blankets
  • Optisolex N-type 220W and 440W blankets
    • IP68; similar to the Renogy;
    • 220W 4.1kg; folded 535x410x65mm; unfolded 810x1570x3.6mm $291
    • 440W = Dual 220W panels zipped together = 7.8kg, 535x435x115mm folded; 1700x1600x4mm unfolded;
  • Renogy N-type 200W and 400W blankets
    • 200W 4kg MC4 and USB ports 45W USB-C 18W USB-A folded 410 x 390 x 78mm unfolded 1560 x 810 x 38mm ($AU360)
    • 400W 7.3kg MC4 ($AU619)
  • iTechWorld 200W solar mat with raptor skin
    • Anderson plugs; 7.5kg; folded 480mm x 50mm x 490mm; unfolded 1560x980x5mm; $AU399
  • REDARC 112W Solar Blanket Amorphous Cells
    • flexible amorphous cell technology more able to withstand damage - can walk on it but large area (18 sections 1860×1185 unfolded) very expensive $AU2400 w/o controller!! 4.8kg;
  • REDARC 190W Solar Blanket SunPower
    • 15 sections 1720×930 unfolded; 7.2kg; $AU2066 w/o controller
  • various brands such as Mobi on Ebay sellers such as Outbax (but they appear to have a poor service reputation and they seem to over-rate the output of their panels significantly 5) ) who have various wattage “2021 tech” blankets with controllers for lithium at discounted prices - perhaps a nice size for output is a 300W Mobi for $AU219 but you may need to consider output may only be 200W max and these controllers apparently interfere with AM radio reception and also apparently get hot if used as output devices (use your battery to connect to devices to resolve this)

semi-flexible thin sheet panels to mount on van roofs

roll up flexible thin sheet panels

  • Renogy CIGS 150W Flexible
    • 150W 1658*646*1.5mm 2.1kg MC4; $AU459
    • “Unbreakability, unmatched durability against hurricanes and hailstorms” 360° flexibility can roll up to ~30cm diameter tube; 25yr wty;
    • mounting on roof: clean and dry roof, peel off the adhesive tape and attach the solar panel.
1)
https://www.acsolarwarehouse.com/news/what-are-shingled-solar-panels/
2)
https://reneweconomy.com.au/australian-researchers-almost-double-perovskite-cell-efficiency-with-graphene-layer/
3)
https://www.pveducation.org/pvcdrom/solar-cell-operation/open-circuit-voltage
4)
https://www.pveducation.org/pvcdrom/solar-cell-operation/effect-of-temperature
5)
https://www.productreview.com.au/listings/outbax
australia/camping_solar.txt · Last modified: 2026/03/27 06:26 by gary1
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki